Close

    Do you have questions about our products?
    Do you need our service?

    +49 61 61 - 93 07 - 0 Contact form Service request close

    genius 700

    prod_genius700
    Travel distance X - Y: 400 x 350 mm
    Travel distance Z: 350 mm
    Table: Length x width: 575 x 500 mm
    fast
    high-performance
    universal

    Contact

    Your contact person:
    Michael Huth
    +49 - 6161 - 93 07 - 44
    moc.m1607002132etsys1607002132-kz@h1607002132tuh.m1607002132
    Request offer

    The machine has a high rigidity with pre-stressed anti-friction guideways. The moment of inertia of the C-axis is comparatively high at 0.6 kg / m2. In addition, it has a highly accurate measuring system. Even demanding EDM processes can be carried out economically and with high precision with the genius 700. The “on the fly” filter replacement prevents standstill, and the central lubrication system reduces maintenance times. The genius 700 can be connected from two sides, making flexible positioning possible. The height-adjustable control desk is ergonomically designed and allows working while seated.

    Travel distance X – Y 400 x 350 mm
    Travel distance Z 350 mm
    Table: Length x width 575 x 500 mm
    Distance: Table – sleeve w / o chuck max. / min. 550 / 200 mm
    Dielectric fluid above table 420 mm
    Overall dimensions (w x d x h) (1,213 x 2,326 x 2,530) mm
    Total weight (w / o fluids) 3200 kg
    Workpiece weight 700 kg
    Electrode weight w / o rot. head 100 kg
    Electrode weight w. rot. head 50 kg with man. safety
    Rapid traverse speed X – Y 12 m / min
    Rapid traverse speed Z 18 m / min
    Resolution X – Y – Z 0.001 mm
    Resolution C 0.001°
    Dielectric fluid consumption 330 litres
    Generator genius magic3 (integrated)
    Operating current 80 A (+ 80 A with booster)
    Suction capacity 200 m3 / h (55 l / sec)
    Required cooling capacity 2.5 kW
    Floor load ca. 2.1 N / mm2
    Number of adjustable feet 3
    Weight per foot 2 t
    Diameter of base plate ø 110 mm
    Flow rate (air) 10 l / min
    Required air pressure min. 6 bar
    T-slots: number / width / distance 4 slots / 10 mm / 3 x 100 mm
    Paper cartridge filter 2 x 2 pcs.
    Flushing device 1 Pressure port
    1 Suction connection
    1 Fine amount pressure port
    Flush flow regulator continuously variable
    PROGmodEDM Programming software
    • test routine 8-fold-mould

      material workpiece
      steel 2767
      material electrode
      graphite R 8710
      number of electrodes
      4
      surface
      VDI 21
      wear
      0,002 mm
    • test routine slot

      20 x 2 x 25 mm depth
      material workpiece
      steel 2767
      material electrode
      graphite R 8710
      number of electrodes
      1
      surface
      VDI 40
      wear
      < 0,01 mm
    • test routine rib

      40 mm depth
      material workpiece
      steel 2767
      material electrode
      graphite R 8710
      number of electrodes
      1
      surface
      VDI 40 - 21
      edge wear
      < 0,05 mm
      eroding time
      260 min
    • test routine wear rib

      material workpiece
      steel 2083
      material electrode
      graphite SGL R 8710
      number of electrodes
      1
      surface
      VDI 21
    • test routine slot

      18 mm depth
      material workpiece
      steel 2767
      material electrode
      graphite 8710
      number of electrodes
      1
      surface
      VDI 21
      wear
      0,003 mm
    • test routine wedge

      material workpiece
      steel 2767
      material electrode
      graphite 8710
      number of electrodes
      2
      surface
      VDI 21
      wear
      0,02 mm
    • test routine lettering

      50 x 50 x 1,5 mm depth
      material workpiece
      steel 2767
      material electrode
      graphite R 8710
      number of electrodes
      2
      surface
      VDI 9
    • test routine cemented carbide

      13 x 3 x 0,2 mm depth
      material workpiece
      cemented carbide H 40 S
      material electrode
      tungsten copper
      number of electrodes
      3
      surface
      Ra 0,06 μm
    • test routine cemented carbide

      14 x 14 x 4 mm depth
      material workpiece
      cemented carbide H 40 S
      material electrode
      tungsten copper
      number of electrodes
      4
      surface
      Ra 0,14 μm
    • test routine graphite square 0,5 mm depth

      material workpiece
      steel 2343
      material electrode
      graphite R 8710
      number of electrodes
      2
      surface
      Ra 0,27 μm
    • test routine polishing

      material workpiece
      steel 2343
      material electrode
      copper
      number of electrodes
      2
      surface, polished
      Ra 0,06 μm
    • test routine polishing

      material workpiece
      steel 2343
      material electrode
      copper
      number of electrodes
      2
      surface
      Ra 0,06 μm
    • test routine die

      material workpiece
      cemented carbide
      material electrode
      tungsten copper
      number of electrodes
      3
      surface
      Ra 0,13 μm
      machining time
      1h 10 min
    • test routine large-seized homogeneous surface

      workpiece
      200 x 300 mm
      material workpiece
      steel 2083
      material electrode
      graphite SGL R 8710
    • test routine feasibility

      material workpiece
      graphite R 8710
      material electrode
      graphite R 8710
      number of electrodes
      1
      specials
      shaping of a sprue electrode
    • test routine feasibility

      material workpiece
      graphite R 8710
      material electrode
      graphite R 8710
      number of electrodes
      1
      specials
      shaping of a detail electrode ∅ 0,15 mm x 5 mm length
    Electrode changer 24-fold
    Change system Multi-Change Robot system Chameleon:
    All-in-one solution for all pallet
    and electrode combinations
    Sleeve system, pallet system EROWA, 3R, Hirschmann, POWERGRIP, Mecatool etc.
    C-module for carbide metal working
    O-module for very fine surfaces
    Flushing device expandable to 12 connections
    Q-axis 5th EDM axis
    Rotation head up to 700 r / min
    High pressure flushing device possible
    JOBmodEDM order control system
    IDENTmod Identification
    Temperature compensation possible
    High pressure flushing possible

    See all accessories →

    background

    Machine Details

    Integrated smoke outlet
    Glass scales – at front and side
    Direct spindle drive – with rotation of spindle
    allg_windowsbasiert
    Windows-based programming interface
    Hose connections at the table
    Fully mobile dielectric fluid tank

    Dielectric level above table: 420 mm